Customized Submit button - Data Springs Inc. - DotNetNuke Modules - DotNetNuke Module Product Forums - Product Discussion - DotNetNuke Modules

Customized Submit button

Last Post 10-16-2011 03:06 AM by Perry. 7 Replies.

Author

Messages

Perry

going with the flow
Posts:50
Avatar

10-03-2011 05:26 AM
Hi, I tried to use a customized Image as Submit Button but ended up with error. * Resource interpreted as image but transferred as MIME type text/html * failed to load resource: the server responded with a status of 404 (not found) DF version 3.3; DNN 6.0 I tried many times without success. Please help and thanks in advance. Perry

Chad Nash

Posts:5260

10-04-2011 08:49 PM
Hi Perry - Difficult to know the exact problem or issue but for full support against 6.x you will need to make sure you are on the latest 3.4 release. The 3.3 version is a year or two old now and was never tested against 6.x (or a few versions back actually). I do know that we have not had any reports of this against the 3.4 release and 6.x. Thanks, Chad

Perry

going with the flow
Posts:50
Avatar

10-05-2011 10:01 PM
Hi Chad, I double checked the version and it was actually version 3.4. I also tried again to upload the image and the image is at the rood directory. But, it was not displayed with the same error. Any idea? Thanks. Perry

Perry

going with the flow
Posts:50
Avatar

10-05-2011 10:48 PM
Hi Chad, I also tested the Clear image button and it was displayed successfully. But, submit image button was not. Thanks. Perry

Don Gee

river guide
Posts:273
Avatar

10-10-2011 12:23 PM
Hi Perry, I tried to simulate your problem on www.betasprings.com. Can you tell us if at this link it is reflecting your issue: http://www.betasprings.com/DynamicF...fault.aspx I set up a Micky Mouse image for the submit button and a Donald Duck image as a clear image. This may give Chad something in the sand box to look at. I got the result of Mickey Mouse displaying but not Donald Duck. Thanks

Perry

going with the flow
Posts:50
Avatar

10-12-2011 03:45 AM
Hi Don, That's pretty much the case. The difference in my case was the Clear image button displaying but not the submit image button. I am not sure whether that's the same problem. Thanks.

Don Gee

river guide
Posts:273
Avatar

10-13-2011 07:55 AM
Hi I don't know if it is the same problem but if you checked out my sample on betasprings then at least you know if you did the same thing. If so and it is acting different then perhaps you can check on snowcovered for any patches and see if that helps To get the latest patch available for Dynamic Forms. Please log into your Snowcovered account and then go to Patches and Hotfixes. You should find Dynamic Forms 3.4.50 in there. Or if you have the Collection 4.0, you’ll find it in MyDownloads. Getting the latest patch may help you. Thanks

Perry

going with the flow
Posts:50
Avatar

10-16-2011 03:06 AM
Hi Don, I checked out your sample and found out both of the submit button and clear button are displaying images after the "enable clear button" was ticked. http://www.datasprings.com/desktopmodules/activeforums/themes/grey/save32.png In my case, I did exactly as your sample, but the submit button was not displayed. The version I used is 3.4.5. Any suggestion? Thanks.